WH1125 and WH2125 Series Spot Welding Heads
The WH2125A weld heads for capacitive discharge spot welders are pneumatic weld heads that requires an air compressor. Any size compressor will work since the weld heads come equipped with a pressure regulator. Once connected, the air pressure and head travel speed can be set to any preference. Spot welds are quickly and easily made with each compression of the included foot pedal switch.
The WH2125M weld heads are manually operated weld heads for capacitive discharge spot welders. These weld heads require a manual lowering of the weld head by means of a foot pedal and a chain that goes through the work bench. The WH2125M weld heads have lower initial cost and are well suited for short periods of use.
The WH1125A weld heads are pneumatic weld heads that require an air compressor. Any size compressor will work since the weld head comes equipped with a pressure regulator. Once connected, the air pressure and head travel speed can be set to any preference. Welds are quickly and easily made with each compression of the included foot pedal switch.
The WH1125M weld heads are manually operated. These weld heads require manually lowering the weld head's electrodes by means of a foot pedal and a chain that goes through the work bench. The WH1125M weld heads have lower initial cost and are well suited for short periods of use.
Also available are part numbers WH2250A - Parallel Pneumatic Weld Head accepting 1/4" Electrodes, and WH1250A - Opposed Pneumatic Weld Head accepting 1/4" Electrodes.
Contact sales / buy online
WH1 and WH2 Weld Head Features
- NEW Weld Actuation Indicator Light for Easy Setup (See Image at Right)
- Fine control of weld pressure from 1 to 21 lbs
- Standard Weld Head Pressure 1 to 8 lbs
- Optional Heavy Duty Pressure 3 to 21 lbs
- Higher Weld Head Pressure Available Upon Request
- Air or foot pedal actuated
- Low electrode inertia for fast follow-on pressure
- WH1 and WH2 Weld Heads provide precision and repeatability
